Showing articles 1 - 6 (6 total)
Posted on 12/03/2010 at 12:00 pm | Viewed 781 times
Enerdoor besucht die 2010 Solar Power International Exhibition
OCTUBRE 2010
Enerdoor participó recientemente en el La Energía Solar Feria Internacional en Los Angeles, CA. Los visitantes al stand Enerdoor aprendido acerca de Enerdoor últimas noticias. La compañía también presentó un Filtro DC con una opción para conectar aislados 0 voltios al PE (tierra).
Posted on 06/01/2010 at 12:00 pm | Viewed 958 times
Enerdoor EMC Noise and Interference Seminar
JUNE 2010
On June 1st in Portland, ME and June 3rd in Tewksbury, MA Enerdoor provided an EMC Noise and Interference seminar where we discussed the European Standard and FCC part 15. We explained the the variety of sources where noise can be generated and their effects. We provided a live demonstration of noise generation by an AC drive how to measure and correct the issue by using a line filter.
Posted on 05/01/2010 at 12:00 pm | Viewed 924 times
Enerdoor at 2010 Windpower Exhibition
May 2010
Enerdoor attended the 2010 Windpower Exhibition in Dallas, TX. The visitors to the Enerdoor booth learned many interesting facts about the Enerdoor EMC and RFI filter solutions. Many visitors reported their experience with EMC noise problems. Enerdoor introduced their new DC series filter up to 2500Amps at this event.
Posted on 03/01/2010 at 12:00 pm | Viewed 888 times
Enerdoor US EMC Laboratory
March 2010
Enerdoor has added an EMC Laboratory in the United States in an addition to three existing laboratories located in Europe. The Enerdoor EMC Laboratory allows us to provide maximum support to our customers by testing their machine directly on-site. With our 20 years of experience, Enerdoor can comply your machine at a reduced cost. We utilize a wide array of Enerdoor filters to find the best possible solution for your equipment. The U.S. Enerdoor Laboratory is able to comply machinery to the European Standard 2004/108/EC and FCC part 15.
Posted on 12/01/2009 at 12:00 pm | Viewed 910 times
Enerdoor DC Filter
December 2009
Enerdoor soon will be introducing a new DC filter series for Solar Renewable applications. The new series are called FIN1220.0V and FIN1520.0V and are capable up to 2500 Amps. The standard input voltage is 1000VDC. For additional information please contact us.
Posted on 07/01/2009 at 12:00 pm | Viewed 878 times
Enerdoor Active Harmonic Filter FIN HRMA
November 2009
Enerdoor introduced the Active Harmonic filter FIN HRMA in November at the SPS Nuremberg exhibition. The HRMA filter eliminates the distortion caused by non linear loads and is capable of improving power factor by minimizing the reactive power generated by the load. The HRMA is available from 60 to 300 Amps up to 600VAC. The HRMA can also be connected in parallel for loads above 300Amps.
