Wind and Eolic Power Application
In this application, wind energy is converted into electricity by a mechanical system based on a turbine (horizontal or vertical), which rotates the electricity generator. The voltage produced by the generator, is converted to grid frequency and the voltage is adjusted by an electronic power converter. The use of Enerdoor products in this application is to achieve the requirements of the EU legislation, to avoid exceeding the limits of conducted and radiated emissions, and to ensure correct operation even when noise is deliberately injected as required by the immunity tests.
Furthermore, Enerdoor products eliminate almost all the disorders caused by the inverter generating the power, providing the end-user with efficient clean energy. Enerdoor products, apart from the description above, also function to limit interference on control devices, such as the control for the orientation of the blades depending on wind speed and direction. Our products limit interference on the communication networks inside the system, and eliminate possible problems on the generator where you can see negative effects due to high-frequency switching.
View Enerdoor Products for Eolic Applications
Browse Recommended Filters: |
---|
Single Phase RFI Filter Models: FIN26 Single Phase RFI Filter FIN27 Single Phase RFI Filter FIN27G Single Phase RFI Filter Three Phase EMI Filter Models: FIN7213 Three Phase Filter FIN1200HHV Three Phase Filter FIN538S1 Three Phase EMI Filter FIN1500(HV) Three Phase Filter Three Phase Plus Neutral: FIN1240 Three Phase Plus Neutral Filter FIN1940 Three Phase Plus Neutral Filter DC Filter: FIN7212 DC Filter Motor Protection: FIN930 Output Filter FIN900 Output Filter FIN905SF Sine Wave Filter Passive Harmonic Filter: FINFF Line Reactor 230 Vac FINFF Line Reactor 400 Vac FINFF Line Reactor 480 Vac FINHRM Passive Harmonic Filter Active Harmonic Filter: FINHRMA Parallel Filter: FIN730.001.M Three Phase Parallel Filter FIN230SP.001.M Three Phase Parallel Filter |