Filtros Médicos y Militares

Our Complete Line of Off-The-Shelf Filters are Available in Medical and Military Grade Versions

Medical and Military Filter

Medical Applications

Today’s medical devices such as testing equipment, MRIs and x-ray machines demand high power quality. Enerdoor medical filters provide the clean power necessary to ensure system performance at an affordable cost.  

Enerdoor EMI-RFI medical filters meet the highly demanding requirements associated with medical applications. These filters reduce electromagnetic interferences and guarantee minimal leakage currents and ensure the safe operation of electrical medical devices. Many Enerdoor filters comply with EN 60601-1 and other international standards. 

All models are characterized by high levels of attenuation above 100 dB. For various applications, there are models suitable for filtering supply lines from 50 to 60 Hz, from single phase to three phase, and with currents up to hundreds of amps.  Filters for signal lines such as remote controls, lines connecting sound, video, telephony and digital signals are available.  

Filters for medical applications: 5 MHz - 5 GHz


Military Applications

Our complete line of off-the-shelf filters are available in military grade versions and achieve a high level of shielding on protected environments.  All models are built and tested conforming to all military regulations, including: MI15733,L.F- MIL-STD-220A and Civil UL1283.

This series is characterized by a leakage current to ground (below 30 mA), which allows use in any environment without the need for special installation procedures.

Filters for military applications: 10 KHz - 10 GHz
Filters for scientific and industrial laboratory applications measuring: 100 KHz - 10 GHz 

Browse Medical and Military Filters

quick view

ENC201
  • Filtro EMI para sistemas de incendio con cámara MRI
  • Corriente nominal 1A
  • Tensione nominale 120 Vac
  • 100 dB a 14 kHz
  • 100 dB a 1 GHz
ENC201

quick view

ENR205
  • Filtro de energía eléctrica EMI-RFI para cámaras MRI
  • Corriente nominal 5A
  • Tensione nominale 277 Vac
  • 100 dB a 10 MHz
  • 100 dB a 1 GHz
ENR205

quick view

ENR230
  • Filtro de energía eléctrica EMI-RFI para cámaras MRI
  • Corriente nominal 30A
  • Tensione nominale 277 Vac
  • 100 dB a 10 MHz
  • 100 dB a 1 GHz
ENR230

quick view

ENT205
  • Filtro EMI para Sistemas de Comunicación por Cámara MRI
  • Corriente nominal 2A
  • Tensione nominale 120 Vac
  • 100 dB a 10 MHz
  • 100 dB a 1 GHz
ENT205

Previous Category

Next Category

Full Page