Estabilizador de Voltaje

Protect Equipment From Harmful Voltage Fluctuations

Voltage Stabilizer

A voltage stabilizer is an electrical appliance that delivers a constant voltage to a load at its output terminals, regardless of the changes in the input or incoming supply voltage. It protects equipment or machinery against over voltage, under voltage, and other voltage surges.  They are often used for costly and precious electrical equipment to protect them from harmful high/low voltage fluctuations. This is ideal for industrial and automated machinery.

Electrical equipment is designed for a wide range of input voltage. Depending on the sensitivity, the working range of equipment is limited to a specific value, for instance, some equipment may tolerate ± 10 percent of the rated voltage, while others may tolerate only ± 5 percent or less.

Enerdoor specializes in single and three phase voltage stabilizers that regulate voltage through a series of transformers.  A static control circuit drives the variable autotransformer that supplies the required voltage to a series transformer to bring the main to the rated value. 

Three-phase stabilizers are available in two versions:
The models FINSTT and FINSTC perform voltage regulation by an average of three phases and are suitable for lines with balanced voltage and for an unbalance between phases up to 50%. These models are equipped with one stabilizing circuit to ensure a common regulation of the three-phase and may be connected to input mains without neutral.

The models FINSTTY and FINSTCY are equipped with one stabilizing circuit for each phase and are suitable for unbalanced mains with a maximum unbalance between phases up to 100%. For correct operation, the input line must be three-phase + neutral. Voltage regulators do not transform the voltage and therefore have the same output voltage as the input. When input and output voltages are different, an additional isolating transformer or auto-transformer is required.

Browse Voltage Stabilizers

quick view

FINSMC
  • Tensión nominal 230 Vac
  • Potencia de 1 a 40 kVA
  • Variaciones de voltaje ± 30%
  • Tiempo de respuesta muy rápido

quick view

FINSMT
  • Tensión nominal 230 Vac
  • Potencia de 1 a 40 kVA
  • Variaciones de voltaje ± 30%
  • Diseño compacto
  • Tiempo de respuesta muy rápido

quick view

FINSTC
  • Tensión nominal 400 Vac
  • Potencia de 22 a 780 kVA
  • Variaciones de voltaje ± 30%
  • Tiempo de respuesta muy rápido
  • Núcleo cuadrado lineal

quick view

FINSTCA
  • Tensión nominal 400 Vac
  • Potencia de 55 a 800 kVA
  • Variaciones de voltaje +15% a 35%
  • Tiempo de respuesta muy rápido
  • Núcleo cuadrado lineal

quick view

FINSTCY
  • Tensión nominal 400 Vac
  • Potencia de 48 a 4000 kVA
  • Variaciones de voltaje ± 30%
  • Tiempo de respuesta muy rápido
  • Núcleo cuadrado lineal

quick view

FINSTT
  • Tensión nominal 400 Vac
  • Potencia de 3 a 31 kVA
  • Variaciones de voltaje ± 30%
  • Diseño compacto
  • Tiempo de respuesta rápido
  • Núcleo toroidal

quick view

FINSTTA
  • Tensión nominal 400 Vac
  • Potencia de 3 a 40 kVA
  • Variaciones de voltaje +15% a 35%
  • Diseño compacto
  • Tiempo de respuesta rápido
  • Núcleo toroidal

quick view

FINSTTY
  • Tensión nominal 400 Vac
  • Potencia de 3 a 120 kVA
  • Variaciones de voltaje ± 30%
  • Diseño compacto
  • Tiempo de respuesta rápido
  • Núcleo toroidal
Full Page